SAFER COPPER CONDUCTOR is mixed ready to be used and we do not recommend thinning.
BRUSHING is the most common way of application. Use a clean soft synthetic brush.
DIPPING objects - Two or more work best.
SPRAYING gives the thinnest and most even
film for plating. For small objects an airbrush works very well and uses the smallest amount of paint. When spraying wear a respirator and work in a well-ventilated area or spray booth.
THINNING we do not recommend thinning .
DRYING TIME: Allow 2 - 3 hours drying or until it is dry to touch. Application and film thickness will determine drying time. A hair dryer may be used to accelerate drying.
CATHODE WIRE must be attached firmly before coating with conductive paint. Enter your plating bath live, at low amperage, then gradually turn amperage up, increasing to a max of 15 - 25 amps per square foot range.
Mix well before each use. Do not allow paint to freeze. Seal container tightly and store in cool area.
APPLICATION: Organic materials must be completely encapsulated with a lacquer or varnish to prevent organic breakdown and contamination of the bath. Highly textured surfaces will require more paint - Use our paint directly out of the bottle and stir well before use. Clean with soap and water.
Safer Solutions Inc 215-880-6009
We ship with USPS.
Frequent Answers to frequent question